Versions Compared

Old Version 74

changes.mady.by.user Ross Philipson

Saved on

compared with

New Version 75

changes.mady.by.user Ross Philipson

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

VendorModelTCPU Arch.FW/BIOS Ver.Processors(s)MemoryP/FS5 P/FS4 P/FS3 P/F

Details

DellE6430 ATGLIvy BridgeA16Core i5-3360M8GPPPPext-300;
DellOptiplex XE2DHaswellA10Core i5-4570S16GPPPPext-300;
DellE7440LHaswellA08, A15Core i7-4600U8GPP Fext-300; "creation or verification of S3 measurements failed" - this is a different failure mode - needs investigation. Tried a firmware uprev but no luck. Earlier test below showed this was broken with 1.7.0 too.
LenovoT440LHaswellGJET75WW (2.25)Core i5-4300U4GPPPPext-300;
DellE6540LHaswellA14Core i7-4800M8GPPPPext-300;
HPEliteBook 850 G1LHaswellL71 01.30Core i7-4600U16GPP Pext-300;
HP800 G1 SFFDHaswellL01 A.02.23Core i5-45708GPP PPext-300;
HP8300DIvy BridgeK01 02.51Core i5-347016GPP PFext-300; On resume, TXT reset the system during GETSEC[SENTER]. I don't think this is a regression - I think this system has always had problems.
HP

EliteBook 2760p

LSandy BridgeF.42Core i5-2540M4GPP PPext-300;
HP

EliteBook 2170p

LIvy BridgeF.00Core i5-3427U4GPP PFext-300; It looks like the system reset on resume from S3. Since I have no serial output it is hard to tell but I would bet it goes down during GETSEC[SENTER]. I tried to uprev the firmware to F.61 (latest) but short of installing Windows on it I can't manage to do the update. I believe the problem is the extremely old firmware though.
DellOptiplex 9010DIvy BridgeA05 -> A20Core i7-37708GPP PPext-300; The system originally had the Dell 0xffffffff TXT error code bug in firmware. The uprev to A20 fixed that.
HPRevolve 810 G2LHaswellL86 01.30Core i7-4600U8GPP Pext-300;
HPZ840WHaswell?M60 01.58Xeon E5-2630 v396GBP

 P

P FS3 failing with tboot error in Observation 1, similar observation on tboot 1.7
DellLatitude E7350TBroadwellA06Core M-5Y718GBPPPFSleep failures indeterminate due to lack of serial connection. Only get a black screen upon attempting to sleep, no current method to further diagnose.
HPZBook 14 G2LBroadwellM71 1.09Core i7-5600U16GBPPPFSleep failures indeterminate due to lack of serial connection. Only get a black screen upon attempting to sleep, no current method to further diagnose.
DellDell Optiplex 980DIvy BridgeA12Intel i7-377010GBPP Pext-300;
DellDell Latitude 14 7000 (e7450)LBroadwellA03Intel 5th Gen i5-5200U8GBPP F

ext-300; S3 failing, once the machine is put to sleep it can not be revived, without a force off, which then displays a TXT error.

RJP: these 2 broadwells - are they coming back form S3 at all - is there any serial logging after the resume is initiated?

DellDell Latitude 14 7000 (e7450)LBroadwellA03Intel 5th Gen i7-5600U8GBPP Fext-300; S3 failing, once the machine is put to sleep it can not be revived, without a force off, which then displays a TXT error. "TXT Measured boot failed"
DellDell Latitude E6540LHaswellA13Intel i7-4610M8GBPP F

ext-300; S3 failing. once the machine is put to sleep it can not be revived, without a force off, which then displays a TXT error. "TXT Measured boot failed"

RJP: I tested an E6540 above and it worked with a newer FW version - may want to try this.

DellOptiPlex 7010DIvy BridgeA20Intel i7-37708GBPP Pext-300;
DellOptiPlex 9020 SFFDHaswellA09Intel i5-457018GBPP Pext-300;
DellOptiPlex 9020 MTDHaswellA09Intel i7-477012GBPP Pext-300;
HPHP EliteDesk 800 G1 TowerDHaswellL01 V02.53 RevAIntel i7-477032GBPPWE Pext-300; Measure launch failed after shutdown and restart. The machine was then restarted again and measured launch was enabled. 
HPHP Compaq Elite 8200DSandy BridgeJ01 V02.15Intel i5-250014 GBPP Pext-300;
HPHP Pro x2 612THaswellM83 V01.03Intel Core I5-4302Y8GBFF Fext-300; Installer just sits at the first screen, downloading files. Then attempted to install both network and CD, and on the dock and off the dock.
HPHP Elite 1011 x2TBroadwellM72 V.01.03Intel Core M-5Y718GBFF F

ext-300; The installer warns that VTX is turned off, while in the BIOS it is not. 

NOTE: this is likely a firmware issue beyond our control and not strictly a TXT/TBOOT failure.

HPHP Z230WHaswellL51 V01.51Intel Xeon E3-1225-v3416GBPP Pext-300;
HPEliteBook Folio 9470MLIvy Bridge68IBD Ver.F.60Intel Core i5-3437U8GBPP Pext-300;
HPZ820WHaswellJ63 V03.85Intel Xeon Processor E5-2600130GBPP Fext-300; Error message displays during the install that states this system might not be compatible with OXT. failed at S3, system will not resume unless it is forced off and restart.
NCSVortexWHaswell1804Intel I7-477016GBPP Pext-300;
NCSStratusDIvy BridgeF3b1GAIntel I7-377032 GBFF F

ext-300; Unable to Clear the TPM, This is a frequent issue with the stratus.

NOTE: this is likely a firmware issue beyond our control and not strictly a TXT/TBOOT failure.

...