...
a) During the above and below steps and during the actual install, note any issues with keyboard functionality.
2.2) All Hard Drives hard drives visible.
a) At the prompt, type fdisk -l and press enter.
b) Verify and note the disk(s) have been identified by the system and the size(s) of the disk(s) are correct.
2.3) All optical media drives are visible.
a) At the prompt, type cat /proc/sys/dev/cdrom/info
...
i) Information about the CD/DVD device(s) is displayed.
2.4) All network cards /ports are visible.
a) At the prompt, type lspci -v | grep -iE 'Wire|Ether' and press enter.
i) Information about the Network Interface Cards is displayed.
...
NOTE: This is based on the system being cleared and appropriate settings enabled/disabled in the BIOS (Section 1: BIOS Configuration)
...
NOTE: This is based on the system being cleared and appropriate settings enabled/disabled in the BIOS (Section 1: BIOS Configuration)
...